Heated Hoses Manufacturers | Elmatic

(029) 2077 8727    

Wentloog Rd, Rumney, Cardiff, CF3 1XH

Heated Hoses


We design a vast range of heated hoses that are suitable for maintaining a temperature during transport of adhesives, oils, chocolate, gas, emulsions and alimentary, cosmetic and pharmaceutical products.


Our heated hoses consist of smooth PTFE tube sheathed with stainless steel, insulated by silicon foam (200°C) union with a temperature control by PT100 or thermocouple type J or K centered on the heating hose.

Elmatic’s heated hoses will heat any type of flexible hose, from a single hose to multiple hoses bunched together. We can also heat hoses given by customers or advice on suitable alternatives.

Heated Hose | Elmatic

The labelled diagram above is a typical bulk of heated hoses that we undertake. We do however pride ourselves on our individual service and our objective approach to each customer’s particular needs.

We try therefore not to describe any particular construction as a standard heated hose but offer a range of variations to suit each application.

The diagram also refers to a particular state of fabrication achieved at the present time. As a progressive and innovative company, we are always looking at new improvements in both materials and techniques, so we would reserve the right to amend or modify any of the above in the light of continuing development.

All of our heated hoses must be connected to a suitable temperature controller otherwise, damage will occur. Temperature controllers for all types or applications can be specified and supplied with heated hoses or separately.

For more information regarding our heated hoses, email sales@elmatic.co.uk and we will respond to your message as soon as possible. Needless to say, that Elmatic is the best manufacturers of industrial and electric heating elements.

Heated Hoses Custom Design

Please fill in the specification form for custom designed heated hoses quotations. Please supply the following technical details.


Please specify the application that the hose is to be used for.


This information will be help full to cross reference the heaters original specification.


To customers specification. (if longer than 17m this can be connected internally)


Swaged fittings, to most pipe thread systems, are in a range of materials and sizes, please epecify thread size.


Sizes to suit customer's specifications can be supplied. Standard 1/8", 3/8", 1/2", 3/4", 1", 1.1/8"


To customers specification.
(max. around 330 ° C at 100 bar)
Please specify tempature and pressuer required.


To customers specification.
(Max. around 350 bar at 135 ºC)


Available with a thermocouple type J or type K, or as a PT 100. (Please specify)


The heating element is insulated with a layer of silicone rubber for moisture protection.


A thick layer of closed cell silicone foam rubber.


Black polyamide sleeve braiding. Smooth finish for food applications available upon request.


Moulded silicone rubber caps are used exclusively.


To customers requirements. (Please specify voltage required.


The temperature sensing and the heating wires are standard. Additional wires, and/or tubes, can be incorporated in the build up, as necessary, to control customers operation or to feed additional equipment.

Contact Details

Company Name
Contact Name
Email Address
Telphone Number
Which industry are you in?

Enquiries and Delivery

"When it comes to deliveries, most items are available in 15 working days. However, Elmatic do offer additional emergency services for customers who are in a breakdown situation. This includes a 48hr services on Mica products, Cartridge Heaters and Ceramic Knuckle Heaters and a 7 day service on our range of Sheath Wire Incoloy Heaters. For all enquires please contact a member of our sales team who will be happy to assist. +44 (0) 2920 778727"

Get in touch